Interior Dead Flat Topcoat

Interior Dead Flat Topcoat is a water resistant, low VOC, extremely durable varnish for interior use.  This unique formulation is designed for interior use and has built-in mold and mildew resistant properties.  Our topcoat is designed for furniture, cabinets, and other high traffic surfaces. 

Paint Couture Interior Topcoats come in four sheens of Dead Flat, Flat, Satin, and Semi-Gloss.  When additional protection is needed, use our Interior Topcoats to protect your cabinetry, furniture, and craft projects.  Our topcoats can be used on top of Paint Couture paints, metallics, textures, and glazes.  They may be used over many other products, and we recommend you do a test sample prior to starting your actual work.  Our topcoats are proudly made in the USA.

Application: Do not shake but stir thoroughly before use.  If you accidentally shake, let container sit for one hour prior to use to avoid bubbles on your project.  Apply in even thin layers.  Be sure Paint Couture Paint has fully dried at least four hours and glazed pieces 24 hours before applying topcoat.  Apply Paint Couture Interior Topcoat with a good quality synthetic brush, foam brush, or roller, or use a sprayer.  It may be lightly sanded 45 minutes after the first coat.  If adding a second coat of topcoat, allow the first coat to dry for two hours.  Once dry, lightly sand with 400 grit sandpaper, wipe away any dust residue, then apply the second coat.  Paint Couture topcoat products are recommended for a more durable finish.  Not for use on decks or floor surfaces.

Clean up: Use warm soapy water.

Coverage:

Approximately 20 square feet @ .70 mils per quarter pint (4 fluid ounces) / 118 ml
Approximately 40 square feet @ .70 mils per half pint (8 fluid ounces) / 237 ml
Approximately 80 square feet @ .70 mils per pint (16 fluid ounces) / 473 ml
Approximately 160 square feet @ .70 mils per quart (32 fluid ounces) / 946 ml
Approximately 640 square feet @ .70 mils per gallon (128 fluid ounces) / 3.79 L

Caution: Use with adequate ventilation.  Do not take internally.  Close container after each use and pour out what you need.  Do not use topcoat out of this container.  Avoid contact with eyes and prolonged contact with skin.  If accidentally swallowed, contact a physician or the local poison control center.  Keep out of reach of children. Use and store between 50°-90°F.  Do not topcoat in direct sunlight.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust.  Lead is toxic.  Exposure to lead dust can cause serious illness, such as brain damage, especially in children.  Pregnant women should also avoid exposure.  Wear a NIOSH-approved respirator to control lead exposure.  Clean up carefully with a HEPA vacuum and wet mop.  Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

California Proposition 65 Warnings:
CAUTION: Contains Crystalline Silica in an encapsulated state:  If the paint is sanded, the dust that is emitted can contain crystalline silica which has been shown to cause cancer with long term exposure.  Use only in an adequate ventilated area.  Wear appropriate respiratory protection when spraying or sanding.  This product can expose you to chemicals, including Crystalline Silica respirable powder, Carbon Black respirable powder, Titanium dioxide (airborne, unbound particles of respirable size) which are known to the State of California to cause cancer. Avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air flow during application and drying.  If you experience eyes watering, headaches or dizziness, wear respiratory protection or leave the area.  For more information go to www.P65Warnings.ca.gov

NOTE: Visit a Paint Couture Retailer to view Paint Couture Interior Topcoats to ensure sheen satisfaction.

PAINT COUTURE Interior Topcoats ARE PROUDLY MADE IN THE USA